Bass Pro Shops   Daveys Locker Sportfishing  Newport Landing Sportfishing  The Fishing Syndicate  Carver Covers  Flips Fishing  Pete Marino Guide Service  Bob Sands Fishing Tackle  
Results 1 to 10 of 12

Thread: Light Line Finesse Fishing Question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2004
    Location
    Antelope Valley
    Posts
    1,252

    Default Light Line Finesse Fishing Question

    I found a successful way to bass fish my local lake...wacky worm thin Senkos. I use 6lb straight flourocarbon (Seagur Invisix)on a 1000 Sedona spinning reel & 7.6 rod. no backing. Spooled new line this year.., maybe 1/4 to 1/2 spool...line don't want to stay on.Thoughts???

    MM

  2. #2
    Join Date
    Mar 2008
    Location
    Beaumont, CA
    Posts
    423

    Default

    MarkyMark,

    What do you mean by "line don't want to stay on"? Is it twisting and wanting to flip off the front of the spool? If so, you may have wound it on the spool wrong. The line spool should be laying on it's side, then wind on 8 or 10 cranks of line and stop. Check the line to see if it is starting to twist. If so turn the filler spool over on it's other side. Spinning reels need to go on the spool the same way it was wrapped on the filler spool. If you don't install it the right way it causes all kinds of trouble.

  3. #3

    Default

    Yep^^^.
    For spinning reels the spool should be laid on its side.
    The line needs to come off the filler spool counterclockwise......

  4. #4
    Join Date
    Nov 2004
    Location
    Antelope Valley
    Posts
    1,252

    Default

    Yeah. Twisting off spool when I open the bail as if it's full. I layed the filler spool face up on floor while sitting in chair.

    MM

  5. #5
    Join Date
    Jan 2007
    Location
    san clemente
    Posts
    371

    Default

    Fluorocarbon has always given me fits on spinning gear, the memory is a pain. I gave up and only use co-polymer anymore. I have had issues with knots just falling apart for no apparent reason too.

  6. #6
    Join Date
    Jan 2006
    Location
    Northridge
    Posts
    475

    Default

    Quote Originally Posted by MarkyMark View Post
    Yeah. Twisting off spool when I open the bail as if it's full. I layed the filler spool face up on floor while sitting in chair.

    MM
    I don't know if this is some kind of industry standard, but I always find that I have to put the spool label-side-down to not get twisted. I do perform the check described earlier, though (reeling in for a little bit, then letting the line go slack to see if it twists).

  7. #7

    Default

    Learn to tie a uni to uni (line to line) knot. Use either a thin braid or Berkely Nanofil as your main line with a floro leader. No line twist issues with the braid and nanofil. A spool of floro lasts a long time when only using 10 feet at a time. I know this doesn't solve your current problem, but that braid set up is really good.

  8. #8

    Default

    After you spool up, tie the end of your line to a post, or something sturdy. Walk out about 150 feet of line, and engage the bail, and PULL!!! Do this for about a minute. Any memory will go away.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •