Bass Pro Shops   Daveys Locker Sportfishing  Newport Landing Sportfishing   The Fishing Syndicate  Carver Covers  Tight Lines Guide Service  Bob Sands Fishing Tackle 
Results 1 to 2 of 2

Thread: Inexpensive Truck bed rod holder

  1. #1
    Join Date
    Sep 2007
    Location
    Bakersfield, CA
    Posts
    526

    Default Inexpensive Truck bed rod holder

    Here is a low budget truck bed rod holder that I have found to work really well so far. Cost is about $5 and I got all the parts at Lowes.

    Build list:

    (2) black rubber bungee cords
    (1) 1/2" piece of foam pipe insulation without the adhesive
    (3) zip ties

    Connect the two bungee cords together and stretch across the bed. Be sure the clamp ends where you connected the bungee cords together so the pipe insulation will fit nicely over it. Cut the insulation to the correct length and cover the bungee cords. Zip tie the two ends and the middle just tight enough to hold the foam in place but not cut into it. The last step is to cut notches in the foam where you want place your rods.


  2. #2
    Join Date
    Nov 2010
    Location
    Castaic
    Posts
    1,117

    Default

    Nice Dave!!!
    I will be copying...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •