Bass Pro Shops   Daveys Locker Sportfishing  Newport Landing Sportfishing   The Fishing Syndicate  Carver Covers  Tight Lines Guide Service  Bob Sands Fishing Tackle  
Results 1 to 5 of 5

Thread: 1/15 Bako report with experimental duct planer board v1.0 video

  1. #1
    Join Date
    Sep 2010
    Location
    Bakersfield
    Posts
    6,388

    Default 1/15 Bako report with experimental duct planer board v1.0 video

    Plan was to meet up with feel the steel just before graylight and hit some newer zones that has been paying off for him in these tough conditions. I had baseball tryouts at 9 so I only had a few hours.

    First spot and first cast bwam,,, Cutbait is on... 3 seconds later and cutbaits off...

    One cast more and feel the peel is on..

    Battles this beast on the surface, working it hard. Fish is peeling lots of drag. I drop my rig and run over for some vid footage just as fts pulls the fish up the concrete and the hooks pull.

    It was like slow motion watching it flop back in. Gary was chasing it in, and I could see his brain working.. He was thinkin of how to get it back and almost slid in..

    Fish was in the 8lb class

    We hit a couple other spots for nothing. By this time it was getting close to time for me to leave. Thought I would give the planer board a shot to see what it can do.

    Worked great! Hit the otherside at walking speed, which is what I think I need to run at. I didn't get to fish with it but will be doing so soon.

    Sorry the vid was short. Battery died.

    http://www.youtube.com/watch?feature...&v=bkJ9hPQePbA



    Talked with FTS couple hours later and he had farmed 3-4 more fish.

    It was a tough day with that dirty water. We're accrediting the farmed fish to the stained water..

    Makes us feel better anyway
    Last edited by cutbait; 01-15-2011 at 01:03 PM.

  2. #2

    Default

    I have been meaning to try out a planing bobber for like 3 years now but never got serious enough about it to experiment and buy one. It seems like a neat idea and take on a planer board. You can see it here. http://www.bulletbobber.com/ . If anyone else tries it out before me, please post up some results. It has always intrigued me but just never actually got down to trying it.

  3. #3

    Default

    How was the flow out there if any?

  4. #4
    Join Date
    Sep 2010
    Location
    Bakersfield
    Posts
    6,388

    Default

    I made the planer brd. 1X10 pine and all-thread

    Current was fine

  5. #5
    Join Date
    Jul 2007
    Location
    BAKERSFIELD
    Posts
    5,480

    Default

    WTG C,BAIT,,,,,,,,,,,,,,,,and GLFTS,,,,,,,,The board===SWEET,,,,,,,,,,,,,,,,

    Were going to need a port and starboard,,,,,,,,,GETONIT!

    TRAIL BLAZER
    STRIPER11550:Twisted:

    STRIPER FEST
    HEAVY STRINGER
    CHAMPION
    2009

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •