Bass Pro Shops   Daveys Locker Sportfishing  Newport Landing Sportfishing   The Fishing Syndicate  Carver Covers  Tight Lines Guide Service  Bob Sands Fishing Tackle 
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: New Boat help...

  1. #1
    Join Date
    Oct 2007
    Location
    Canyon Lake
    Posts
    324

    Default New Boat help...

    Does anyone know of any inexpensive/cheaper places to get a small aluminum bass boat re carpeted...Anyone know of an approxiamate price range...??? anyhelp is appreciated...Oh i am in Orange County...Thanks

    flyforfish21

  2. #2
    Join Date
    Sep 2007
    Location
    Kalifornicateyou
    Posts
    339

    Default

    Cheapest would be in your garage.
    Not that hard and can be done by a novice in less than a twelve pack.

    You'll need to pick up some items to do this though.

    1. Marine grade carpet, your choice of color.
    2. Marine grade adhesive.
    3. Big Magic Marker.
    4. Measuring tape.
    5. Razor blades or carpet knife.
    6. Digital Camera.
    7. 12 pack of good beer.

    Take ya less than a day to do it. Maybe 4-6 hours depending on consumption rate of beer.


    Cost?

    Maybe 70.00????

    pm for step by step if interested.
    Last edited by Cap'n Ron; 04-15-2008 at 06:05 AM.

  3. #3
    Join Date
    Aug 2007
    Location
    GeordyLand,Sun Valley
    Posts
    3,764

    Default

    yeah it's cheaper doin it yourself like cap'n said...at least you'll save $ and be proud of you job,,,,and drunk!LOL

  4. #4
    Join Date
    Oct 2007
    Location
    Canyon Lake
    Posts
    324

    Default thanks guys

    thanks for the replies so quick...minus the fact i am not 21 yet...! Anyways i need to replace the plywood too...i can do that no problem...do you guys have any suggestions of where to get the carpet and glue...?? i can always go to bass pro but thats a drive from my house and they dont have a lot...Anywhere with 15 miles of anaheim...???? Thanks in Advance

    flyforfish21
    Last edited by flyforfish21; 04-15-2008 at 12:30 PM.

  5. #5
    Join Date
    Sep 2007
    Location
    Woodland Hills CA
    Posts
    472

    Default

    Carpet alone is over 100.00,I just bought 6x7' today for 75.00, the adhesive is 17.00 for a gallon of outdoor stuff from home depot.. trowel, razors, labor... time.. NOT cheap.. worth doing, yes//

    .just carpeted today.. not finished at ALL.
    chris..........

  6. #6
    Join Date
    Aug 2007
    Location
    GeordyLand,Sun Valley
    Posts
    3,764

    Default

    Quote Originally Posted by chansen49 View Post
    Carpet alone is over 100.00,I just bought 6x7' today for 75.00, the adhesive is 17.00 for a gallon of outdoor stuff from home depot.. trowel, razors, labor... time.. NOT cheap.. worth doing, yes//

    .just carpeted today.. not finished at ALL.
    chris..........
    DAMNNN!
    $75?
    I bought 6'x6' special marine carpet for $8 at kragens?

  7. #7

    Default

    Just go get some carpet from Home Depot. The gray color is what I used. Dont remember the exact price but it was reasonable. Re carpeting and replacing the plywood is actually a bigger job than one might think!:cool:

    johnsfishing

  8. #8

    Default



    This is after the carpeting and major work was done.

    johnsfishing

  9. #9
    Join Date
    Sep 2007
    Location
    Woodland Hills CA
    Posts
    472

    Default

    DONT make me feel bad.....

    :(

    chris

  10. #10
    Join Date
    Sep 2007
    Location
    Kalifornicateyou
    Posts
    339

    Default

    Hey Johnsfishing,

    Not Marine grade carpet?

    Job looks nice.

    But it's not Marine Grade?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •