View Full Version : Issue with fishfinder maybe someone can help.
So i installed a fish finder on my buddies boat and works perfect except one thing... when ever we turn on the boat while the fish finder is on the fish finder freezes or gets a distorted screen till we turn it off and back on any idea what can be causing this? And what would be the fix i do have somewhat of a electronics background but haven't fully learned everything yet.
thanks in advance.
Fysher
08-10-2012, 06:40 AM
Sounds like it could be caused by a spike in electricity surge at that moment when you crank your boat on. Usually all electronics are off before starting your boat. Next time, just keep all electronics off, start the boat, and then turn on the electronics, that should resolve the problem.
If you notice in your car, if you have the radio on and you start your car, the radio stops playing for a few seconds and then later turns back on. Same concept as the boat.
drifter023
08-10-2012, 08:40 AM
Is it hooked direct to the battery? If not should be plus keep finder wires away from ignition switch.
dixoncider
08-10-2012, 09:49 AM
Low Voltage to FF on start...