TJ's garage sale thread

[tacklejunkie]

Always adding new items below. IF YOU SEE AN ITEM ITS STILL FOR SALE.
Items sold will be marked or deleted as such! Scroll down past the first ad for more items for sale.
READ THE POSTS! ;)



RODHOLDERS ARE SOLD


OK dudes first up I have a pair of nice rod holders.
Not your run of the mill walmart jobbers!
A Sand Spike for surf/jetty fishing sharks and a RodHoggs rodholder!
I am asking $20 for both U-Pick-Up! Yes sir, Both!
I don't believe I will be using them any longer.
They are both in excellent condition with no rust.
The rodhogg you can even purchase a bait table that attaches to it.
Send me a PM if you are interested.
I will be listing more stuff frequently and updating.
Too lazy to do it all at once!
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9231.jpg

If my dog can find use for them as a pillow, surely you'll have a use for them toooo!
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9232.jpg

[tacklejunkie]

I have a 7' medium power moderate action carot stix gold rod for sale. Halibut rod for Lucky Craft flash Minnows.
Non micro guide version without the funny line cutting tip guide.
$100.
Pics tomorrow. Pick up price. Will ship UPS for like $25 Rod retails $200

[tacklejunkie]

I have a Daiwa Spinmatic Tuflite 2 piece 1-4lbs 5'6" (I'd recommend 2lb with it) spinning rod.
lure weight 1/32-1/8pz
Very nice for an ultralight trout spinning rod. Bought it at Mack's in Bishop for $60. All Fuji hardware.
Very low use/hours. I've used it once at a lake with Golden Trout as a back-up rod.
I'm asking $30 picked up.
Pics upon request. Nice 2lb trout rod.

[tacklejunkie]

1987 HONDA CRX (first gen) with stripped interior( weight loss jenny craig program), nitrous, corbeau racing seats, matching interior carpet, missing sunroof (lightened the car a bit hehe) 17" white wheels on lo pro tires. Loaded... just needs some TLC and
Needs engine rebuild. lol Looks great on the outside for this year, no body rust. Missing one turn signal front left.
$1000. Come and look at it. Pics on request.
Can be running again for $700 or lower. Has a wing and all kinds of extras.

[tacklejunkie]

I have an OLD TRUCK in my back yard for sale.
Needs carbs cleaned and it will run again.
$1500. come take a look. Pics tomorrow in daylight.
:Cool:

Edit will take $1000.

Seriously there is a truck in my back yard I want to sell.

[tacklejunkie]

Transmission rebuilding table
Has drains/channels on the edges so oils/fluids don't leak off the table when you rebuild transmissions on it.
HEAVY AS HELL. Probably 300lbs or so.
$100. Come haul it away. Real deal professional equipment.
Tried calling trany shops around town but they don't have room.
Seriously solid garage table for a workshop or something. Wont let screws and oils fall off the table.

[tacklejunkie]

Collectible Beer Steins
I have a box of 8 beer steins.
three are german. Three are budweiser and one is A.Busch. Two are glass.
All new antiques that have never been used beyond sitting on the shelf.
Collectors items. $50 for the box.
Pics on request. :Cool:

[DarkShadow]

Do you have hubcaps for a '72 Pinto hatchback?

[tacklejunkie]

Mead LXD75 OTA (optical tube assembly) Big Giant 8" telescope for a telescope mount.
(Mount required like Losmandy or Meade LXD75 bottom mount)
Has upgraded robotic Next Generation Focuser. Go totally remote!
comes with dew shield for astrophotgraphy and mounting rings.
$200 See and photograph the galaxies like never before. I'll even throw in eyepieces and a DSLR attachment lens.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9235.jpg

Two 10" Pioneer subs in boxes and Pioneer 760w amp. they are very dusty but that is not sunlight damage. they have been stored inside and the dust will wipe right off! The amp is 760w.
Asking $75.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9234.jpg

Malibu parts. I believe.
Asking $40 OBO
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9233.jpg

[AngryAgent]

do you have hubcaps for a '72 pinto hatchback?:rofl::rofl::rofl:

[fish-o-haulic]

Bro i might be interested in the telescope, or at least i know someone who might be let me check with them first.

[tacklejunkie]

Indestructible Team 57 combat wing.
The only RC airplane you can not break. Literally! You just recover the special indestructible "EPP" foam!
There is also one carbon fiber kite rod through the middle.
Just add transmitter and receiver from LHS. (Local hobby shop)
Includes battery and special metal geared servos already pre-installed.
I built and tested the airplane myself and have built several more of these.
You need a windy cliff to fly it. It works like a remote control seagull. you can stay up for hours on one charge once you get ti down.
I can find places to fly this thing from the beach to the hills. Just find a windy cliff and throw it off, then steer it around to stay in the "updraft"!.
Special 57 edition. $70 as described above.
Bottom is ocean green. I've flown it at Silverwood Lake and Huntington Beach and all over the place. Acton, SF bay, you name it.
PM for more info/pics
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9236.jpg

[tacklejunkie]

Rod building and reel cleaning.... let me know!
Can do Carbontex© upgrades etc and if you want a special rod buy the parts and I can build it for you. Just tell me how you want it assembled!

Bait Painting and Coatings
Need your lunker punker double coated?
Need that LCFM repainted?
I can try and do my best. Have all the stuff on hand! Let me know!
I can probably do foil wraps too but don't want to get into photo wraps.

PC repair
Have my vocational A+ certification in PC repair. Can do home visits.
Good with networking and website solutions as well.

Auto/Motorcycle mechanic
yadda yadda yadda plenty of real references. Just finished a valve shim adjustment on my buddies motorcycle.
Saved him $200. Don't trust mechanics they scam you! Bring it to somebody you know you can trust! I'll even photograph everything the whole way.

I'll list more for sale tomorrow. I have too much junk laying around.

[tacklejunkie]

One open spot for hiking with TJ and his dog to the top of MT WHITNEY. The tallest in the USA.
$15+ your own cold weather backpacking gear. Early October, assuming no snow. Maybe even in the snow!
Inquire within. Surely stopping to fish somewhere along that trip. Must be able to handle hiking at low oxygen. lol
It's on a weekday so if you can't miss work this might not be for you.

[tacklejunkie]

I have a Gun lock. NIP, $10. U-Pick-Up
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9209.jpg

Driod X windshiled mount. NIP. $10 U-Pick_up
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9207.jpg

http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9208.jpg

[DarkShadow]

The dog for sale?

[tacklejunkie]

They sell those at the pound! haha.
This one is already trained! $1k. lol j/k I already love him! Couldn't let him go.
He got lost in my yard for 30 seconds the other day I almost had a heart attack.

[Cangler]

One open spot for hiking with TJ and his dog to the top of MT WHITNEY. The tallest in the USA.
$15+ your own cold weather backpacking gear. Early October, assuming no snow. Maybe even in the snow!
Inquire within. Surely stopping to fish somewhere along that trip. Must be able to handle hiking at low oxygen. lol
It's on a weekday so if you can't miss work this might not be for you.


I'm thinking of doing the John Muir Trail then

But what i really need is a mastic asphalt spreader

[tacklejunkie]

I only have connections with Geo. M. Martin Co. corrugated rotary die cutter stackers and CAT industrial street pavers.
http://farm3.static.flickr.com/2111/1525875787_b728d0c11e_z.jpg

This might spread your asph but it''s not gonna be my phault.

[tacklejunkie]

I'm thinking of doing the John Muir Trail then

But what i really need is a mastic asphalt spreader

after whitney maybe next year I'm going PCT.
I have to do it. I'll be like sasquach when I come out. City dad will be waiting for me at the top.

You da man if you can handle time in the backwoods! I remember doing it as a kid.
The hardest part is keeping showered. Have to force yourself to jump in the lakes every day.
We don't need no stinking civilization accept for Taco Bell when you come out of the high country.
Get home, always wanna go back.

C'mon guys just heard some 9y/o is gonna climb whitney in the news the other day.
Heading out to San gorgonio this weekend for a shot half way up the mountain or so. We'll see how it goes.
Skyler warped a new flyrod we wanna play with and I haven't any fish on my new psycho-dallic spinning rod.

[tacklejunkie]

A photograph of the STEINS has been requested!
Request GRANTED!
Many thanks! We have them on ebay but people want to underbid maybe so will likely take them down 12hrs before they are over. They are cool, we don't feel like letting them go for less than $50. They belong to someone we know who was harshly put down before their time. :Crying:
http://i240.photobucket.com/albums/ff280/tacklejunkie/steins.png

We have a whole bunch of miscellaneous stuff to sell that is hard to get rid of kinda.

[tacklejunkie]

Here's the truck...
It ran when I brought it here. Less than six months ago.
It does not run now, but I will make it run for you and you can drive it away for $1000.
Or you can take it not running for $800.
I don't even know why it stopped running but I bet it's carbed and sat too long with gas that went bad and I can fix that quick.
The truck appears to be a Ford 250 Custom?

Like I said I can make it run if you need.

We can do DMV release of liability and you can go with me to DMV for paperwork.
I'm not sure if we have the title but we can take care of it all legally at the DMV right away.

http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9237.jpg

http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9239.jpg

http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9241.jpg

http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9240.jpg

[tacklejunkie]

I need to uncover the CRX and take pictures of that. Here is the seats for the CRX.
They include a $200 custom corbaeu bracket set to fit the seats into a first gen CRX.
The seats must be sold with the CRX.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9242.jpg

Here's a drumset missing a bit of hardware but 4 pieces are there.
$200. Needs new heads but includes everything to play pretty much. Will play fine.
I could revamp these puppies and make them sweet! The colored things on the cymbals are popped balloons.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9243.jpg

[tacklejunkie]

Just trying to pull together extra "play money" with all the stuff for sale.
Have a few rods I still need to replace and could use a sierras vacation again. haha.

I have an engine stand in the garage with an engine block on it. not sure what kind of engine. I'll get pics soon.

[angelsfan951]

were are u located at? i might get those holders from u

[tacklejunkie]

Where do you fish? I can meet you there. PM me.
BUMP!

Will entertain offers. I have more to sell too. lol

I pulled the transmission table out of the garage and cleaned it off.
I'm asking $50 now, priced reduced, TJ/walmart rollback.

[fish-o-haulic]

I need to uncover the CRX and take pictures of that. Here is the seats for the CRX.
They include a $200 custom corbaeu bracket set to fit the seats into a first gen CRX.
The seats must be sold with the CRX.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9242.jpg

Here's a drumset missing a bit of hardware but 4 pieces are there.
$200. Needs new heads but includes everything to play pretty much. Will play fine.
I could revamp these puppies and make them sweet! The colored things on the cymbals are popped balloons.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9243.jpg

I might take the set if it was a 5piece. what cymbals are those? I have zildjians on my home set. But dang if that was a five peice id be slobering all over it. What drumheads? evans, aquarian, or the best remo. and those look like vic firth sticks.

[tacklejunkie]

I have this here nice Daiwa 1500A Fuego Zion spinning reel with extra spool and manual.
I will clean and lube it before sale.

Reason for sale: I'm going to begin using overpriced Japanese baitcasters for small line.

My loss, your gain. $175 pick up or $185 shipped, insured. Retail $299
Will last many years. Feels like a steez. Sealed drag.

mechanically 10/10... unles you count some bearing wear than 9/10
asthetically it looks great. 9/10.. bit of boat rash here and there. Nothing you can even really notice. No dings in the metal. Just scratches in the frame paint from rod holders on the foot neck etc.

Holds 100yrds 6lb line.

http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9244.jpg

[tacklejunkie]

I might take the set if it was a 5piece. what cymbals are those? I have zildjians on my home set. But dang if that was a five peice id be slobering all over it. What drumheads? evans, aquarian, or the best remo. and those look like vic firth sticks.
Money talks and BS walks, my friend!
=D
If you have money, maybe a used beaten down four piece set isn't for you.
It needs some TLC and the price reflects. Paistes, as the cymbals show.
A drummer would have known. Sees the name on the sticks and not cymbals?
You smoke the good stuff.

[fish-o-haulic]

Oh crap i use paistes on my other set but i use the 602 not the 302. And i was just taking a guess on the stick names. but im more into zildjians than paistes. but since you choose to question my standing as a drummer LOL, i have to question yours. what size sticks are those? LOL. and what size cymbals looks like a 16inch crash and a 20-22inch ride. 14inch hihats, let me guess sheet bronze. LOL I must worn you ive been a drummer all of my life, playing for more than just my stuffed animals. HAHA. question me again and i shall hunt you down and hang you with my snare wire. XD

[DockRat]

were are u located at? i might get those holders from u


Where do you fish? I can meet you there. PM me.
BUMP!



What City Are You In ???

Is the city you live in a secret ?

Are you in hiding ?
DR

http://i192.photobucket.com/albums/z12/ckcreator/ImWanted.jpg

[tacklejunkie]

I travel back and fourth from Riverside to Los Angeles on a bi weekly basis.
I am all over Socal.
It is easiest for me to meet up at your favorite fishing spot, sometimes. I just magically appear on a two wheeled chariot of death! But seriously if you want to pick something up, PM me for my (current) location. If you really want an item I'm willing to stick out my neck to get it to you. This is the black market, after all.

..and that looks nothing like me. lol
My ears are much bigger and I still haven't found my precious.
Have you seen it?

(are they gone yet?)

http://i240.photobucket.com/albums/ff280/tacklejunkie/ImWanted.jpg

[tacklejunkie]

To be perfectly honest, all my FTA's have been recalled accept for one I'm workin on in Fresno next! haha
Damn speeding from SF to LA and back. I bet I'm cleaner than 50% of you.

[tacklejunkie]

Will take $150 for the Daiwa Fuego Zion 1500a
Bump.
Nobody interested in anything?!

[Troutman65]

Hey TJ, you got some cool stuff for sale . I keep looking back to see what you will put up for sale next :Wink:

[Cangler]

Hey TJ, you got some cool stuff for sale . I keep looking back to see what you will put up for sale next :Wink:


Lurker ...

[tacklejunkie]

Price reduction on the steins.
$30 for the box, U-Pick-Up.

Price reduction on the truck. $500 not running, $800 running.
Thanks for lookin'/lurkin' guys. No worries.

[vortec_cruiser]

What engine and transmission are in the truck?

[angelsfan951]

i just sent u a pm

[tacklejunkie]

What engine and transmission are in the truck?
It's a Ford 250 is all I know.
I can check year and engine No. in the morning.

Will check PM's now.

[jerr-dog]

after Whitney maybe next year I'm going PCT.
I have to do it. I'll be like sasquach when I come out. City dad will be waiting for me at the top.

You da man if you can handle time in the backwoods! I remember doing it as a kid.
The hardest part is keeping showered. Have to force yourself to jump in the lakes every day.
We don't need no stinking civilization accept for Taco Bell when you come out of the high country.
Get home, always wanna go back.

C'mon guys just heard some 9y/o is gonna climb Whitney in the news the other day.
Heading out to San gorgonio this weekend for a shot half way up the mountain or so. We'll see how it goes.
Skyler warped a new flyrod we wanna play with and I haven't any fish on my new psycho-dallic spinning rod.

Hey I didn't realize there was any backpackers on here & I would LOVE to do Mt Whitney it's still on my list. Where are you located? If you are seriously considering the PCT trail next year that would be cool too. I don't know anyone who can take that much time off or like you said can handle the back country for extended periods of time. I can go 4-5 days without shower no prob if there is no water source readily available. Always looking for new hiking partners ect.

[tacklejunkie]

I just got the bill for the two person reservation on my credit card today.
It's official. I'll be making a shot at it, if there is no snow covering my boots.
We have a day and a half to get up and a day and a half to get down. (might be able to add on if they don't care)
So far nobody is in for sure.

One thing, I don't want to have to drag anyone up either. lol
If you for some reason can't make it, you need to be competant enough to pitch your tent (no pun intended) right there on the spot and set up camp until I get back, or you'll have to hike down to your vehicle without me. I'm going for it. I may not be able to make it up either, who knows. haha
Anything can happen. As long as you're game for that and still around by then, you can go.

If I have water with me I'm 90% sure I can make it right up the hill no matter how crazy it is. Just a matter of pacing yourself and keeping your breath. I do crazy trout hikes all the time too so I'm used to this.

It's even possible people can add on to this day also! Make sure you guys get with me nice and early to line it up.

I have to at least say I tried to tackle the highest mountain in the USA before. Specially since it's right there in our back yard. I've been to 12000' with 40lbs of gear on my back and I can go higher.

[Elkubano13]

pic of carrot stick?

[tacklejunkie]

Pic of stick.
Only real rash on it is the bottom metal piece that comes off to adjust the weight for your reel/balance.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9245.jpg

[Crawler]

Lets see a pic of this trans table TJ. :Envious:

That is a smokin deal on those Tama drums (snaredrum looks like a DW pacific to me). If I didnt already have a maple dining room table made by Pearl, :LOL: I rekon I would take those off your hands.

[Crawler]

And since you are into CDs where are all the crates of records you are selling? I know you dont need/want them. lol

[tacklejunkie]

The trany table is extremely dusty and dirty but it will clean up very nice.
It is a very functional table that catches leaking oils. The feet are adjustable height so the table can be leveled out.

It's no joke, a real trany rebuilding table.
Again, it needs to be cleaned but it's a great table and not rusty. Needs to be oiled up like a machine.
Maybe even a touch of rustoleum rattle can paint to seal it up.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9246.jpg

It has the channels welded on to catch oil

http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9247.jpg

Here's the adjustable height feet.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9248.jpg
A VERY VERY solid table for a machinist or a mechanic or whatever. A great shop table for the garage too.
Very heavy and sturdy. You're gonna need a long bed to pick this up or a flat bed.


I have no vinyl. That was before my time, you guys are old. I began life in the 80's... right when CD's made the scene.
I was playing the drums today. They sound great! Somebody come take them for $200 before I change my mind. They're totally worth that. They just need to be cleaned up and tuned up and a piece of hardware repaired on the TOM.
Good garage kit, don't have to worry about thrashing them around a bit.

[tacklejunkie]

Last night I fixed a broken Motorola Droid X screen for a friend for $50. ($40 for parts, $10 for my services)
Another friend told me they paid $120 to have their droid screen replaced.

I have done Apple Iphone screen repairs as well.


If you guys have tough smartphone repairs, bring them to me and I'll save you money.
http://i240.photobucket.com/albums/ff280/tacklejunkie/DSCN9249.jpg

[Crawler]

That is a nice table TJ. Can I bother you to put a tape measure on it and tell me how long - tall - and deep it is? It looks like it might be a bit long for my shop but I know a few gearheads who might need something like that. Thanks.

Somebody is coming over to my house tonight that might be interested in that drumset. I will show him this thread.

Also, I have hundereds of records and im only 31. :LOL:

[Crawler]

I just noticed the gun lock. So I have to ask.

Where are all the guns / ammo for sale.

[tacklejunkie]

Just never bought any records. My idols do it with CD's, etc.
I'd actually love to share my music but then again I wouldn't! who knows what will happen.

The table is 10'2" L x 3'2" D x 4' H (to the backboard height)

Big.

No firearms for sale.

Many Thanks, Drive Through, Come Again.

[angelsfan951]

how much would u charge to do the screen on an ipod touch its the 4g and also if u still have the holders ill get those from u in a couple days

[tacklejunkie]

Just like $10.
It only takes me about an hour.
Just order the screen/parts for it. There's probably a kit on ebay for your model.
Make sure you know weather it's just the screen (digitizer) or the LCD behind the screen also.
I can fix both! I just follow the tutorials on youtube.
If you are confident in your micro abilities you can do it yourself free or I'll do it for you being skilled in micro mechanical electronic devices..

Rest of the items are first come first serve basis. =)

[tacklejunkie]

Rodholders are spoken for.
Still have everything else.

[GeordyBass]

I have a HTC Hero from Sprint how much do you do these for?
Thanks!

[tacklejunkie]

I'll look it up and see.
Never done one before so not 100% positive I can do them.
If they sell a parts kit for your phone on ebay to fix it I'm sure I can do it.
Edit: what exact model # is it Geordy?
Here's a $20 repair kit.
http://cgi.ebay.com/Touch-Screen-Digitizer-HTC-HERO-200-Google-G3-CDMA-/190547497467?pt=LH_DefaultDomain_0&hash=item2c5d8411fb#ht_2212wt_906
But I already have a T5 and T6 driver. Maybe you can find one with just the screen and no tools for less money.

I bet if you search youtube they have repair directions.