View Full Version : Transducers
chris
09-20-2010, 11:03 PM
I'm going to get a furuno navnet system and have everything figured out except which transducer and why. The boat is a 24' walkaround. Can anyone tell me how much better a 1 kw transducer is going to be than 600 w. through hull or transom? Can i use an in hull system? less holes more peace of mind. Any help would be appreciated
DockRat
09-21-2010, 07:10 AM
Thru hull is better. Transom is good for having trophy fish sawed off.
I got 600 w Airmar with a high speed fairing block about 3' forward of the transom.
Check out the high speed fairing blocks or go thru hull.
DR
chris
09-21-2010, 12:50 PM
your transducer mounts on the hull on the bottom? i saw fairing blocks but they looked like through hull transducers still
DockRat
09-22-2010, 08:35 AM
your transducer mounts on the hull on the bottom? i saw fairing blocks but they looked like through hull transducers still
Check it out.
http://www.google.com/products/catalog?hl=en&expIds=17259,24813,25941,26617&sugexp=ldymls&xhr=t&q=transducer+fairing+block&cp=13&wrapid=tljp1285167953730124&um=1&ie=UTF-8&cid=15777933868017397340&ei=XxuaTJ2UL4KmsQPnrsmpAw&sa=X&oi=product_catalog_result&ct=result&resnum=3&sqi=2&ved=0CCYQ8wIwAg#
http://i216.photobucket.com/albums/cc139/dacbo/Concordance/08Transducer.jpg
The kayak shape fairing block is about 12" long and 4" thick.
You have to cut the fairing block in half.
Here is how I installed mine.
Found a spot for it.
Leveled the boat then useing a angle finder determined I had a 18 degree angle on the bottom of the boat.
Sawed the block in half at 18 degrees on a table saw.
1/2 gets glued inside the boat and 1/2 gets glued outside the boat.
The hull angle cut is so the transducer points straight down.
Then had to drill about a 1 1/2" hole in the bottom of the boat for the brass transducer.
Sealed it up with 3M 5200 and has been sitting in the water for 3 years.
Works Great.
If you go with a fairing block make sure it is clear of your trailer bunks.
Type in TRANSDUCER on photobucket.com or Youtube.com
Good luck, DR
http://www.youtube.com/watch?v=I3PWWiKaCFc&feature=related
chris
09-22-2010, 10:42 AM
thanks for the info. the airmar transom mount 260 looks like a it'll do a great job. I have a 200 horse outboard , a swimstep, a speedo and a temp unit in the back already. What would be comparabletothe tm260 in a thru hull ?
DockRat
09-23-2010, 06:42 AM
What would be comparabletothe tm260 in a thru hull ? I dunno ?
http://www.youtube.com/watch?v=ZgUNGNb34ik
DR