Bassnut
06-05-2009, 09:00 PM
Asking $60.00 I don't need this one, I picked up a new one. SOLD
The 100SX utilizes a precise 24 degree beam transducer to locate bottom structure and show fish directly below your boat. Exclusive Structure IDTM grayscale displays detailed views of bottom hardness and underwater structure where fish hide. ID+TM fish identification marks the size and depth of detected fish eliminating guesswork.
http://i21.photobucket.com/albums/b251/bassnutt/101_1225.jpg
Features
Single Beam, 24 degrees
600' Depth Capability
Depth Alarm to 99'
High Definition FSTN Display
Structure IDTM
ID+TM Fish Identification and Depth
3 Size Fish Alarm
Quick Disconnect Swivel Mount
Depth and Fish Alarms
Feature Memory
Zoom/Auto Zoom
Built in Diagnostic Mode
Waterproof Enclosure
Compact transducer mounts on the transom or bonds inside most fiberglass hulls.
Specifications
Depth Capability:
600 feet
Operating Frequency:
200 kHz
Transducer (Standard):
XHS-6-24 with 20 foot cable
Power Output:
250 Watts (RMS), 2000 Watts (peak to peak)
Transducer Area of Coverage:
24 degrees @ -10db
Power Requirement:
12 VDC
Display Type:
FSTN Liquid Crystal Display
Display Matrix & Size:
128 V x 64 H Pixels, 2.90 inches x 2.35 inches
Unit Size (installed):
6 ¾ inches H x 6 ¼ inch W x 4 ¼ inch D
Made in U.S.A.
The 100SX utilizes a precise 24 degree beam transducer to locate bottom structure and show fish directly below your boat. Exclusive Structure IDTM grayscale displays detailed views of bottom hardness and underwater structure where fish hide. ID+TM fish identification marks the size and depth of detected fish eliminating guesswork.
http://i21.photobucket.com/albums/b251/bassnutt/101_1225.jpg
Features
Single Beam, 24 degrees
600' Depth Capability
Depth Alarm to 99'
High Definition FSTN Display
Structure IDTM
ID+TM Fish Identification and Depth
3 Size Fish Alarm
Quick Disconnect Swivel Mount
Depth and Fish Alarms
Feature Memory
Zoom/Auto Zoom
Built in Diagnostic Mode
Waterproof Enclosure
Compact transducer mounts on the transom or bonds inside most fiberglass hulls.
Specifications
Depth Capability:
600 feet
Operating Frequency:
200 kHz
Transducer (Standard):
XHS-6-24 with 20 foot cable
Power Output:
250 Watts (RMS), 2000 Watts (peak to peak)
Transducer Area of Coverage:
24 degrees @ -10db
Power Requirement:
12 VDC
Display Type:
FSTN Liquid Crystal Display
Display Matrix & Size:
128 V x 64 H Pixels, 2.90 inches x 2.35 inches
Unit Size (installed):
6 ¾ inches H x 6 ¼ inch W x 4 ¼ inch D
Made in U.S.A.